Solstice Energy← All resources
Technical guide · U.S. Market Edition

Grounding Grid Resistance Measurement by Fall-of-Potential

A field guide to measuring the equivalent ground resistance of PV, BESS and substation grounding grids, following IEEE Std 81.

Published November 13, 2026 · Vinicius Rafael Palaveri Leoni · 17 pages, PDF
Download the PDF

Why it matters

Ground resistance is one of the main acceptance tests in the commissioning of a PV plant, a substation or an energy storage system. It confirms that the grid installed in the field behaves as the design predicted, and it sets the baseline for future maintenance tests.

The test is simple to describe and easy to get wrong. Probe distance, probe position and the validation of the readings decide whether the number on the instrument means anything.

Key figures from the example

> 5 × Lcurrent probe distance versus largest grid dimension
62%potential probe position along that distance
≤ 10%allowed spread between the side readings
8.85 Ωadopted result in the field example

Example: a measurement taken at a PV plant in Brazil in October 2026.

What the document covers

Who it is for

Commissioning engineers, design engineers and field technicians who perform and record the test.

Reference standards

IEEE Std 81, IEEE Std 80, IEEE Std 142, IEEE Std 2778, ANSI/NETA ATS and MTS, NFPA 70.

Read the full document
Free to download. No sign-up required.
Download the PDF
Educational content. This document describes a method and illustrates it with an example. It is not an engineering study, design or recommendation for any specific project. Solstice Energy does not provide services that require professional engineering licensure in the United States. Site-specific studies must be prepared, signed and sealed by a licensed Professional Engineer.

Questions or comments on this document? Contact us.